Short hair for a round face comes down to half an inch: once a bob grows from below the chin to the jaw, it starts adding width, so most of these cuts need a trim every five to six weeks. They suit fine to medium, straight to loosely wavy hair, and styling takes a round brush and some root lift.
1. Long Pixie Lifted at the Crown

If you have fine to medium density and 1A to 2A texture, this is the short hair for round face shapes I’d suggest before anything else: a long pixie with crown height, because lift over the forehead lengthens the face. I work dry, scissor over comb on the sides, point cutting the crown to four inches and keeping the front pieces at cheekbone length. Lift the crown with a round brush and a light paste. Trim every five weeks.
2. Asymmetrical Bob, Long on One Side
Fine to thick density with 1A to 2A texture handles an asymmetrical bob well, and the long side pulls the eye down past the widest point of a round face. Cutting dry, I set the short side at the jaw, drop the long side an inch below the chin, point cut the ends and part on the long side. Smooth it with a flat brush and tuck the short side away. Trim every six weeks.
3. Chin-Skimming Angled Bob
On fine to medium density with 1A to 2A texture, an angled bob that’s longer in front aims the line down and away from a round face. Working dry, I take the perimeter from below the chin at the front up to the jaw at the back and point cut the ends. A flat brush gives a smooth blow-dry; a dry texture spray finishes it. Trim every six weeks.
4. Bob With a Deep Side Part for Round Faces
Fine to medium density in 1A to 2B texture suits this one, and for short hair on round face shapes the deep side part is the key move: it breaks up the symmetry that makes a round face look wider. My bob lands an inch below the chin, cut dry with point cut ends, with a deep part and the heavy side left a bit longer. Dry the heavy side across using a flat brush. Trim every six weeks.
5. Pixie Cut With Swept Fringe
For fine to medium density and 1A to 2A texture, a pixie with a side swept fringe slices across a round face on a diagonal. Dry cutting, I go scissor over comb on the sides and nape, keep four inches on top, and cut the fringe from the part down to the cheekbone. Dry the fringe across with a flat brush; root lifting mousse lifts the crown. Trim every five weeks.
6. Lifted-Crown Bob for Short Hair Women Round Face Over 50
Fine to medium density with 1A to 2A texture is where the short hair women round face over 50 request most, a bob below the chin with crown lift, works best. Dry cutting, I set the perimeter an inch below the chin, point cut the ends and two short crown layers, then texturize. Flip your head over to dry with root lifting mousse, then smooth through the ends. Trim every six weeks and gloss every eight.
7. Stacked Inverted Bob
Fine to thick density in 1A to 2A texture takes an inverted bob well, with height piled at the back and the front long past the chin. On dry hair I graduate the nape short, sweep the perimeter down below the chin in front and point cut the ends. Roll it under with a round brush and root lifting mousse as you dry. Trim every six weeks.
Save this article
No spam. Unsubscribe anytime.
8. Curtain-Bang Bob With Long Bangs
If you’re fine to medium density with 1B to 2B texture, long curtain bangs angled past the cheekbone lengthen a round face rather than adding width. Starting from a triangle section, I cut the bangs dry from cheekbone to jaw, then set the bob an inch below the chin. Push the bangs out with a round brush and lift the crown. Trim every six weeks.
9. Front-Highlighted Bob for Round Faces
Fine to medium density with 1A to 2A texture suits this short hair for round face shapes, where front-placed highlights move the eye vertically. Cutting dry, I set the bob an inch below the chin with point cut ends and foil level nine highlights in the front sections and nowhere else. Roll it away from the face with a round brush while drying. Trim every six weeks and refresh the highlights every twelve.
10. Pixie With Tapered Sides and Length on Top
For fine to thick density and 1A to 2A texture, tapered sides draw the width in at the ears and a longer top gives height. Dry cutting, I go scissor over comb on the sides and nape, leave five inches up top and point cut it for lift. Push the top up and back with a round brush and finish with a light paste. Trim every five weeks.
11. Soft-Wave Bob Below the Jaw
On fine to medium density with 2A to 2B texture, soft waves on a bob below the chin stay vertical rather than wide, provided the perimeter clears the jaw. Working dry, I set the perimeter an inch below the chin with point cut ends and point cut one layer at jaw level. Use a one inch iron to wave the length away from the face, then shake it out. Trim every six weeks.
12. Fringed Chin Bob for Short Hair Women Round Face Over 60
For fine to medium density and 1A to 2A texture, the short hair women round face over 60 wear best has a chin-level perimeter, a soft side fringe and crown lift. Cutting dry, I point cut the perimeter ends, take the fringe from the part to the cheekbone and point cut two layers at the crown. Roll it back with a round brush and root lifting mousse. Trim every six weeks.
13. Bob With Soft Babylights
Fine to medium density with 1A to 2A texture suits babylights, which soften a round face with no harsh line. I dry cut the bob an inch below the chin with point cut ends and foil level nine babylights across the entire head. Roll it away from the face with a round brush and give the crown lift. Trim every six weeks and refresh the babylights every twelve.
14. Frame-Clearing Bob for Round Faces With Glasses
Fine to medium density in 1A to 2A texture works for this short hair on round face shapes worn with glasses, which needs crown lift and front pieces kept off the frames. Cutting dry, I set the bob an inch below the chin with point cut ends, leave the front pieces behind the arms and point cut two crown layers. Flip upside down and dry with root lifting mousse. Trim every six weeks.
15. Textured Pixie With a Choppy Top
For fine to medium density and 1B to 2B texture, a pixie with a point cut top gets height in pieces and makes a round face look longer. Dry cutting, I go scissor over comb on the sides and point cut deep into the top at three to four inches. Rough-dry with texture paste, then lift the top with your fingers. Trim every five weeks.
16. Middle-Part Chin Length Bob
Fine to medium density with 1A to 1C texture suits a chin length bob with a center part, which splits a round face into two long halves. Working dry, I cut the perimeter at the chin with point cut ends, part it in the middle and point cut the ends on each side. Roll it away from the face with a round brush and lift the crown. Trim every six weeks.
17. Bob With a Bright Money Piece
On fine to medium density with 1A to 2A texture, a money piece on short hair for round face shapes leads the eye down the frame of the face. I dry cut the bob an inch below the chin with point cut ends, lift both front sections root to end to level nine and tone them beige. Blow the front out with a round brush. Refresh the money piece every ten weeks.
18. Pixie Cut With a Clippered Undercut
Medium to thick density in 1A to 2A texture suits an undercut, which tucks the sides in so the top height looks taller. Working dry, I clipper the nape and lower sides to a number two, disconnect the top at four inches and point cut it. Lift the top with a round brush and lock it with a strong paste. Trim the undercut every four weeks.
19. Flip-Out Bob Below the Chin
For fine to medium density and 1A to 2A texture, flipped ends on a bob below the chin turn the perimeter away from a round face. Dry cutting, I set the perimeter an inch below the chin with point cut ends, bevel them and texturize. Roll the ends outward with a round brush, away from the face, and finish with a light hairspray. Trim every six weeks.
20. Side-Bang Chin Bob for Short Hair Women Round Face
Fine to medium density with 1A to 2A texture works for the side bangs short hair women round face clients request when they want the forehead covered but no width added. Cutting dry, I set the bob at the chin with point cut ends, section the bangs off the part and take them from brow to cheekbone. Dry the bangs across with a flat brush. Trim the bangs every five weeks.
21. Glossy Sleek Bob Below the Chin
Fine to thick density with 1A to 1C texture suits a sleek bob, which shows the length on a smooth surface and keeps the sides narrow. On dry hair I hold the shears flat to cut the perimeter an inch below the chin, texturizing only the last half inch. Dry it flat with a paddle brush, flat iron after a heat protectant and add root lift with powder. Trim every six weeks.
22. Jaw-Length Side Fringe Pixie
For fine to medium density and 1A to 2A texture, a pixie with a side fringe cut to the jaw lays a long diagonal across a round face. Dry cutting, I go scissor over comb on the sides and nape, keep the front long and take the fringe from the part to the jaw. Dry the fringe across with a flat brush and lift the crown. Trim every five weeks.
23. Crown-Layered Bob
Fine to medium density with 1A to 2B texture suits short crown layers, which lift a bob above a round face while the perimeter stays put. Working dry, I set the perimeter an inch below the chin with point cut ends and point cut short layers from crown to occipital. Rough-dry with texture spray, lift the crown and don’t touch the ends. Trim every six weeks.
24. Balayage Bob for Round Faces
On fine to medium density with 1A to 2B texture, balayage on short hair on round face shapes puts light on the ends below the chin and lengthens the silhouette. I dry cut a bob an inch below the chin with point cut ends, hand paint level nine through the last two inches and tone to beige. Blow-dry using a round brush. Trim every six weeks and refresh every sixteen.
25. One-Side Tucked Bob
Fine to medium density with 1A to 2A texture suits a tucked bob, where one side tucked back shows the jawline and slims a round face. Cutting dry, I set the perimeter an inch below the chin with point cut ends and texturize the tucked side just a bit shorter. Dry flat with a paddle brush, tuck a side and finish with a light hairspray. Trim every six weeks.
For a fuller picture, see medium hair round face and haircuts for long hair round face.
Short hair for a round face slims when the length angles past the chin, because that diagonal pulls the eye down rather than across the cheeks. I keep one side tucked so the jawline shows through.
























