An inverted bob lives or dies at the nape: graduate it short, set the weight line at the occipital, and the back lifts on its own while the front angles to the chin. Most of these stacked inverted bob haircuts suit 1A to 2B texture, need a trim every four to six weeks, and style with a round brush.
1. Inverted Bob in Its Classic Form
Round and square faces with fine to thick density and 1A to 2A texture get the most from the classic inverted bob, the starting point for every one of these inverted bob haircuts. The nape is graduated short and the front falls to the chin. Cutting dry, I graduate the nape, set the weight line at the occipital, and angle the front down. A round brush rolling the front under handles the blow-dry. Trim every five weeks.
2. High-Stack Version of Stacked Inverted Bob Haircuts
If your face is round or oval with fine to medium density and 1A to 2A texture, stacked inverted bob haircuts with a high stack carry graduation up to the crown so the back lifts in a dome. Cutting dry, I take the nape short and stack in half-inch increments to the crown. Then the front is angled to the chin. A small round brush lifts the stack at the root. Trim every four weeks.
3. Curtain Bangs Inverted Bob
Best on round or square faces with fine to medium density and 1B to 2B texture, curtain bangs soften the back-heavy shape of an inverted bob by adding a second line from brow to cheekbone. On dry hair I graduate the nape and angle the front to the chin. Then I section a triangle and cut the bangs from the brow to the cheekbone. A small round brush blows them out. Trim the bangs every five weeks.
4. Inverted Bob Designed for Fine Hair
Fine density with 1A to 2A texture on oval and round faces relies on nape graduation for body in an inverted bob, so the stack stays tight and the front blunt. Cutting dry, I graduate the nape in quarter-inch increments. The front is angled to the chin with the shears flat. Mousse goes on damp roots, and the back is lifted with a round brush. Trim every five weeks.
5. Lob-Style Long Inverted Bob
Round, square, and oval faces with fine to thick density and 1A to 2B texture suit a long inverted bob, which reads as a lob with lift: back at the shoulder, front at the collarbone. Cutting dry, I put soft graduation into the back at the shoulder. Then I angle the front to the collarbone. Style with a smooth round-brush blow-dry and a little serum. Trim every eight weeks.
6. Thick-Hair Version of Stacked Inverted Bob Haircuts
Thick density with 1A to 2B texture on any face shape needs the weight line thinned in stacked inverted bob haircuts, or the back pushes out like a shelf. Cutting dry, I graduate the nape and set the weight line at the occipital. Internal layers are point cut beneath it to remove bulk. A smoothing cream and paddle brush come first, then a round brush on the stack. Trim every five weeks.
7. Over-50 Soft-Stack Inverted Bob
Women with fine to medium density and 1A to 2A texture, on most face shapes, wear this inverted bob over 50 well: a soft stack and a chin-length front with point cut ends. Cutting dry, I graduate the nape in wider increments and angle the front to the chin. Then I texturize the ends. Volumizing mousse at the crown and a round brush handle the blow-dry. Trim every six weeks.
Save this article
No spam. Unsubscribe anytime.
8. Soft Wavy Inverted Bob
Waved at the front with a one-inch iron, stack kept smooth and broken up with texture spray, a wavy inverted bob makes the back graduation look softer. It suits round and square faces with fine to medium density and 1B to 2B texture. On dry hair I graduate the nape, angle the front to the chin, and point cut the ends. Trim every six weeks.
9. Side Swept Bangs on an Inverted Bob
Dried across with a flat brush while the back is lifted, side swept bangs on an inverted bob follow the angle of the front from part to cheekbone. They suit round and square faces with fine to medium density and 1A to 2B texture. Cutting dry, I graduate the nape and angle the front to the chin. The bangs go from the part down to the cheekbone. Trim the bangs every five weeks.
10. Above-the-Collar Short Inverted Bob
Oval and heart faces with fine to thick density and 1A to 2A texture suit a short inverted bob, which takes the nape to the hairline and the front to the jaw so the whole shape clears the collar. Cutting dry, I graduate the nape tight and set the weight line at the occipital. The front is angled to the jaw. A small round brush rolls the front under. Trim every four weeks.
11. Blunt Fringe Inverted Bob Cut
For oval and oblong faces with fine to medium density and 1A to 1C texture, a blunt fringe on an inverted bob sets a horizontal line against the front diagonal. Cutting dry, I graduate the nape and angle the front to the chin. The fringe is cut at the brow with the shears flat. Use a flat brush to dry the fringe down and a round brush to turn the bob under. Trim the fringe every four weeks.
12. Sleek Inverted Bob Blown Smooth
A paddle-brush blow-dry, a flat iron over heat protectant, and serum are how a sleek inverted bob is styled, since the graduation reads as one smooth curve and every piece must lie flat. Round and square faces with fine to thick density and 1A to 1C texture wear it well. Cutting dry, I graduate the nape, set the weight line at the occipital, and angle the front to the chin with the shears flat. Trim every five weeks.
13. Over-60 Soft Inverted Bob
Any face shape with fine to medium density and 1A to 2A texture works for this inverted bob over 60. The graduation stays soft, the front sits at the chin, and point cut ends keep their thickness. Cutting dry, I graduate the nape in wide increments and angle the front to the chin. Mousse at the roots and a round brush handle styling. Trim every six weeks and gloss every eight.
14. Curly Inverted Bob for 3A to 3C Curls
Oval and heart faces with medium to thick density and 3A to 3C texture suit a curly inverted bob. I cut it dry, curl by curl, so the graduation still shows when the curl springs. The nape is graduated one curl at a time, and the front angles to the chin. Rake curl cream through wet hair, diffuse on low, and lift the back at the root. Trim every eight weeks.
15. Round-Face Picks of Stacked Inverted Bob Haircuts
With fine to thick density and 1A to 2B texture on a round face, stacked inverted bob haircuts work best with the front past the chin, so the diagonal draws the eye down as the stack adds height. Cutting dry, I graduate the nape and set the weight line high. The front is angled an inch below the chin. Lift the stack with a round brush and keep the front smooth. Trim every five weeks.
16. Money Piece Inverted Bob Color
Blown out at the front with a round brush and lifted at the back, a money piece on an inverted bob lights the front pieces where the angle is longest. It suits fine to medium density with 1A to 2B texture. Cutting dry, I graduate the nape and angle the front to the chin. The two front sections are lightened to a level nine and toned beige. Refresh every ten weeks.
17. Point-Cut Textured Inverted Bob
Oval and square faces with medium to thick density and 1B to 2B texture suit a textured inverted bob, with deep point cutting through the ends so the graduation looks soft, not sharp. Cutting dry, I graduate the nape and angle the front to the chin. Then I point cut an inch into the ends. Rough-dry with texture spray and bend the ends using a flat iron. Trim every six weeks.
18. Undercut Inverted Bob With a Flat Stack
Any face shape with thick density and 1A to 2B texture suits an undercut under an inverted bob, which clears bulk from the nape so the stack lies flat against the head. Cutting dry, I clipper the nape to a number two and graduate above it. The weight line goes at the occipital, and the front is angled to the chin. Style with a round brush. Buzz the undercut every three weeks.
19. Bright Copper Inverted Bob
Warm skin tones with fine to medium density suit copper on an inverted bob, which reads bright along the curve of the stack. Cutting dry, I graduate the nape and angle the front to the chin. Color is a level seven copper at the root and a demi through the ends. Style with a round brush and serum. Trim every five weeks and refresh the tone every five.
20. Front-Lit Balayage Inverted Bob
Fine to thick density and 1A to 2B texture suit balayage on inverted bob haircuts, painted brightest at the front where the pieces are longest while the stack stays darker. Cutting dry, I graduate the nape and angle the front to the chin. The front pieces and ends are hand painted to a level nine. Use a round brush and serum to finish. Refresh every twelve weeks.
21. Inverted Bob for a Square Face
On a square face with fine to thick density and 1A to 2B texture, an inverted bob needs the front dropped below the jaw so the diagonal passes the corners. Cutting dry, I graduate the nape and set the weight line at the occipital. The front is angled to an inch below the jaw and the ends point cut. Round-brush it, turning the front under. Trim every five weeks.
22. Blonde Inverted Bob With Shadow Root
Fine to medium density and 1A to 2B texture suit a shadow root on a blonde inverted bob, keeping depth at the crown and light through the front and stack. Cutting dry, I graduate the nape and angle the front to the chin. A level six demi goes on the root, and the lengths stay level nine. Style with a round brush. Trim every five weeks and refresh the root every ten.
23. Inverted Bob on Straight Hair
Blown flat with a paddle brush and bent under at the front with a flat iron, an inverted bob on straight hair holds the graduation without product, so the cut must be clean. It suits round and square faces with fine to medium density and 1A to 1C texture. Cutting dry, I graduate the nape in quarter-inch increments and angle the front to the chin with the shears flat. Trim every five weeks.
24. Deep Dark Brunette Inverted Bob
Cool or neutral skin tones with fine to thick density suit dark brunette on an inverted bob, which makes the curve of the stack look sharp against the skin. Cutting dry, I graduate the nape and angle the front to the chin. A level four demi goes on from root to end. Paddle-brush it flat and add serum. Refresh the tone every eight weeks.
25. Air-Drying Stacked Inverted Bob Haircuts
Any face shape with fine to medium density and 1C to 2B texture can wear stacked inverted bob haircuts that air-dry, with a loose stack and point cut front so the shape falls without a brush. Cutting dry, I graduate the nape in wide increments. The front is angled to the chin and the ends point cut. Rake a light cream through damp hair, side part it, and leave it. Trim every six weeks.
For more, see wavy bob haircuts and choppy bob haircuts.
The inverted bob haircuts read because the front drops lower than the nape, so the cut moves forward instead of sitting level. A trim every five weeks keeps that front weight from going flat.

























