25 Asymmetrical Pixie Cuts, Long on One Side

An asymmetrical pixie comes down to the gap between its sides, from an inch and a half on a soft scissor cut to a five-inch top swept over a clippered number two. That gap sets your upkeep too: most versions need a trim every five weeks, and a shaved side wants the clippers every two.

1. Sweeping Side Asymmetrical Pixie

asymmetrical pixie

Square and oval faces with 1A to 2A texture and fine to medium density suit a side swept asymmetrical pixie, where a five-inch top crosses the forehead to the cheekbone and the other side sits clippered above the ear. On dry hair I take the short side to a number two, then point cut the long side to taper toward the cheekbone. Style by drying the top across on a flat brush. Trim every five weeks.

2. Asymmetrical Pixie Bob With One Long Side

asymmetrical pixie

Heart and oval faces with medium to thick density and 1A to 2A texture hold the line of an asymmetrical pixie bob, one side at the jaw and the nape and other side short and graduated. On dry hair I graduate the nape to the occipital, scissor cut the short side to an inch, and angle the long side to the jaw with flat shears. Style by drying it flat on a paddle brush. Trim every five weeks.

3. Platinum Skin-Fade Asymmetrical Pixie

asymmetrical pixie

Cool skin tones with fine to medium density suit platinum over a skin fade, the highest contrast version of the cut, with bare scalp on one side and white hair on the other. On dry hair I fade the short side from a zero to a number two, cut five inches on the long side, then lift to a level ten and tone violet. Style the long side over and use a bond builder weekly. Every four weeks, retouch.

4. Curly Asymmetrical Pixie, Tapered at the Side

asymmetrical pixie

Heart and oval faces with 3A to 3C texture and medium to thick density suit curls on an asymmetrical pixie, cut dry curl by curl with five inches of shrunken length on the long side and a taper to the skin on the other. I clipper the taper dry, then shape the long side over one eye one curl at a time. Style with curl cream on wet hair and diffuse on low. Trim every seven weeks.

5. Soft Asymmetrical Pixie Over 50

asymmetrical pixie

Most face shapes with fine to medium density and 1A to 2A texture suit this asymmetrical pixie over 50, with just an inch and a half of difference, the long side swept to the cheekbone, and the short side scissor cut instead of clippered. On dry hair I point cut the long side at four inches and leave two on the short side. Style with volumizing mousse and a small round brush. Trim every five weeks.

6. Blunt-Fringed Asymmetrical Pixie Bob

asymmetrical pixie

Oval and oblong faces with 1A to 1C texture and fine to medium density suit a blunt fringe on an asymmetrical pixie bob, a horizontal brow line set against the diagonal of the long side. On dry hair I graduate the nape, clipper the short side, angle the long side to the jaw, and cut the fringe at the brow with flat shears. Style by drying the fringe down. Every three weeks, trim the fringe.

7. Razor-Cut Asymmetrical Pixie for Thick Hair

asymmetrical pixie

Any face shape with thick density and 1A to 2B texture suits an asymmetrical pixie razored through the long side, so the weight tapers off instead of hanging in a block. On dry hair I clipper the nape and short side, then razor the top and long side at five inches and remove interior bulk. Style with a smoothing cream as you rough-dry, then piece with paste. Trim every five weeks.

Save this article

Enter your email and we'll send it straight to your inbox.

No spam. Unsubscribe anytime.

8. Copper Asymmetrical Pixie With Sweeping Bangs

asymmetrical pixie

Warm skin tones with fine to medium density suit copper on an asymmetrical pixie, brightest on the long bangs where they catch light across the forehead. On dry hair I clipper the short side, cut four inches on top, angle the bangs to the cheekbone, and apply a level seven copper at the root with a demi on the ends. Style the bangs across and finish with serum. Every five weeks, refresh the tone.

9. Asymmetrical Pixie With an Unblended Top

asymmetrical pixie

Heart and oval faces with medium to thick density and 1A to 2A texture hold a disconnected top on an asymmetrical pixie, a hard line between the clippered short side and the six-inch top. On dry hair I clipper the nape and short side to a number three, then cut the long side and top at six inches with no blending. Style the top over the line and piece with wax. Trim every four weeks.

10. Blunt Asymmetrical Pixie Bob for Fine Hair

asymmetrical pixie

Fine density with 1A to 2A texture, on round or oval faces, suits a jaw-length asymmetrical pixie with the long side left blunt, since point cutting would thin the perimeter. On dry hair I scissor cut the short side to an inch, graduate the nape softly, and take the long side to the jaw with flat shears. Style with mousse on damp roots and lift the crown on a round brush. Trim every five weeks.

11. Shaved-Side Asymmetrical Pixie With Waves

asymmetrical pixie

Heart and oval faces with 1C to 2B texture and medium density suit waves on the long side of an asymmetrical pixie, which need six inches to bend, so the top stays long and the other side is shaved to a number one. On dry hair I clipper the nape and short side, then point cut the top and long side. Style with sea salt spray scrunched in and rough-dry toward the long side. Every two weeks, shave.

12. Asymmetrical Pixie With a Clipper Line

asymmetrical pixie

Heart and oval faces with medium to thick density and 1A to 2B texture suit a shaved line on the short side of an asymmetrical pixie, which makes the clipper work a feature. On dry hair I take the short side to a number one, trim a single line from temple to crown, and cut the long side at five inches. Style the long side over and piece with wax. Every two weeks, re-cut the line.

13. Deep Brunette Asymmetrical Pixie Bob

asymmetrical pixie

Cool or neutral skin tones with fine to thick density suit dark brunette on a jaw-length asymmetrical pixie, where the jaw-length diagonal reads like a drawn line. On dry hair I graduate the nape, clipper the short side, angle the long side to the jaw, then apply a level four demi root to end. Style flat on a paddle brush and finish with serum. Every eight weeks, refresh the tone.

14. Asymmetrical Pixie for Rounder Faces

asymmetrical pixie

Round faces with 1A to 2B texture and medium to thick density suit the asymmetrical pixie when the long side drops below the jaw and the crown has height. On dry hair I clipper the short side, graduate the nape high, and angle the long side an inch below the jaw. Style the crown up on a round brush and keep the long side smooth against the cheek. Trim every five weeks.

15. Micro-Fringe Asymmetrical Pixie

asymmetrical pixie

Heart and oval faces with fine to medium density and 1A to 1C texture suit micro bangs on an asymmetrical pixie, stopping an inch above the brow on a slight diagonal. On dry hair I clipper the nape and short side, cut four inches on top, and take the bangs an inch above the brow with point cut ends. Style the bangs down on a flat brush. Every three weeks, trim the bangs.

16. Warm Honey Asymmetrical Pixie Bob

asymmetrical pixie

Warm skin tones with fine to medium density suit honey blonde on a jaw-length asymmetrical pixie, warming the long side without brass while the close-cut side stays a shade darker. On dry hair I graduate the nape, clipper the short side, angle the long side to the jaw, then lift to a level eight with a gold-beige tone. Style the long side smooth and finish with a light oil. Every six weeks, tone.

17. Asymmetrical Pixie With a Clipped Nape

asymmetrical pixie

Heart and oval faces with 1A to 2B texture and medium to thick density suit an undercut nape on an asymmetrical pixie, the back and short side clipped so only the top carries length. On dry hair I take the nape and short side to a number one, then cut the long side and top at five inches with point cut ends. Style the top over and piece with paste. Every two weeks, buzz.

18. Shadow-Rooted Blonde Asymmetrical Pixie

asymmetrical pixie

Fine to medium density with 1A to 2B texture suits a shadow root on a blonde asymmetrical pixie, keeping depth at the scalp, which matters since the clippered side shows skin. On dry hair I clipper the short side, cut five inches on the long side, then apply a level six demi at the root and keep the lengths at level nine. Style the top over. Every ten weeks, refresh the root.

19. Asymmetrical Pixie Bob in the Grow-Out Phase

asymmetrical pixie

Any face shape with fine to thick density and 1A to 2B texture can carry a grown out asymmetrical pixie bob, the short side kept at an inch while the long side moves past the jaw. On dry hair I scissor cut the short side, graduate the nape lightly, and point cut only the ends of the long side. Style the long side forward and tuck the short side. Every five weeks, tidy the short side.

20. Choppy Textured Asymmetrical Pixie

asymmetrical pixie

Square and oval faces with medium to thick density and 1A to 2B texture suit point cutting an inch deep into the long side of an asymmetrical pixie, which breaks it into pieces over the clipped side. On dry hair I clipper the nape and short side, cut five inches on the long side, then point cut the ends and the top. Style with texture spray as you rough-dry, then piece with paste. Trim every five weeks.

21. Asymmetrical Pixie for Angular Square Faces

asymmetrical pixie

Square faces with 1A to 2B texture and medium to thick density take an asymmetrical pixie well when the long side sweeps past the cheekbone to soften the jaw corner. On dry hair I clipper the nape and short side, cut five inches on the long side, and angle the front below the cheekbone with point cut ends. Style the crown up and the long side across. Trim every five weeks.

22. Silver Gray Asymmetrical Pixie Bob

asymmetrical pixie

Any face shape with fine to medium density and 1A to 2A texture suits gray hair on a jaw-length asymmetrical pixie, bright on the long side against the darker close-cut side. On dry hair I graduate the nape, scissor cut the short side to an inch, and take the long side to the jaw with flat shears. Style on a round brush and finish with a violet-toned serum. Trim every five weeks.

23. Asymmetrical Pixie With a Long Temple Piece

asymmetrical pixie

Round and square faces with fine to thick density and 1A to 2B texture suit one long face framing piece at the temple on the long side, which gives the asymmetrical pixie a single line past the cheekbone. On dry hair I clipper the nape and short side, cut four inches on top, and leave the temple piece at six with point cut ends. Style the piece forward and the top over. Trim every five weeks.

24. Smooth Combed-Flat Asymmetrical Pixie

asymmetrical pixie

Square and oval faces with 1A to 1C texture and fine to thick density suit an asymmetrical pixie combed flat, which shows the diagonal as one clean edge across the forehead. On dry hair I clipper the nape and short side to a zero, then cut five inches on the long side with flat shears. Style flat on a paddle brush, smooth with a flat iron, and finish with serum. Trim every four weeks.

25. Wash-and-Go Asymmetrical Pixie Bob

asymmetrical pixie

Any face shape with fine to medium density and 1C to 2B texture suits an asymmetrical pixie bob that air-dries, the long side point cut so it falls in pieces. On dry hair I clipper the short side, graduate the nape softly, angle the long side to the jaw, and point cut deep into the ends. Style with a light cream on damp hair, push the long side forward, and leave it. Trim every six weeks.

For more, see short haircuts for women and wispy bangs.

An asymmetrical pixie turns on the long side brushed forward over a close opposite side, because that single unevenness is the edge. A deep side part shows the shape.

Save this article

Enter your email and we'll send it straight to your inbox.

No spam. Unsubscribe anytime.

Scroll to Top