A shaggy pixie rough-dries with sea salt spray, your fingers, and a quick shake, so most versions skip the round brush entirely. The shape comes from roughly three inches of layering at the crown against longer pieces at the temples and nape, with ends razored or point cut so nothing lines up. Plan on a trim about every six weeks.
1. Original Razored Shaggy Pixie

Oval and square faces with medium to thick density and 1B to 2B texture suit the classic shaggy pixie, with short crown layers and longer pieces at the temples and nape. My cut: the crown point cut dry at three inches, the temple and nape pieces left at five, and every end razored so nothing lines up. Style with sea salt spray, a rough-dry, and a shake. Trim every six weeks.
2. Earlobe-Length Shaggy Pixie Bob
Oval and heart faces with medium to thick density and 1B to 2B texture suit the shaggy pixie bob, the longest version, with a short-layered crown and the front at the earlobe. My cut: the crown point cut dry at three inches, the front angled to the earlobe, the nape and ends razored. Style with texture spray and a rough-dry, twisting the front pieces with paste. Trim every six weeks.
3. Crown-Layered Shaggy Pixie for Fine Hair
Fine density with 1A to 2A texture, on oval and round faces, suits a shaggy pixie that keeps its layers to the crown so the perimeter stays full. My cut: shallow crown layers point cut dry at three inches, the nape and sides left blunt at two inches, no razor. Style with mousse at damp roots, a rough-dry, and a light paste through the crown. Trim every six weeks.
4. Cheekbone Curtain Bangs on a Shaggy Pixie
Round and square faces with fine to medium density and 1B to 2B texture suit curtain bangs on a shaggy pixie, split at the center and falling to the cheekbone into the temple pieces. My cut: the crown point cut dry at three inches, a triangle sectioned, the bangs cut brow to cheekbone, and the ends razored. Style the bangs out with a round brush and rough-dry everything else. Trim every five weeks.
5. Weight-Removing Shaggy Pixie Bob for Thick Hair
Thick density with 1B to 2C texture can wear this on any face shape, since the layers of a thick-hair shaggy pixie take out weight so it won’t balloon. My cut: the crown point cut dry at three inches, the front angled to the earlobe, internal layers point cut through the sides, and the ends razored. Style by rough-drying with smoothing cream and texture spray. Trim every six weeks.
6. Forehead-Covering Shaggy Pixie Over 50
Fine to medium density and 1A to 2A texture on most face shapes suit the shaggy pixie over 50, with soft crown layers and the fringe swept to the cheekbone to cover the forehead. My cut: the crown point cut dry at three inches, the sides left over the ear, the fringe cut from the part to the cheekbone. Style with a small round brush and volumizing mousse. Trim every six weeks.
7. Bendy Wavy Shaggy Pixie
Oval and heart faces with medium density and 1C to 2B texture suit a wavy shaggy pixie, with four inches on top so the layers bend instead of standing up. My cut: the crown point cut dry, the temple and nape pieces left at five inches, the ends razored. Style with sea salt spray scrunched into damp hair, a rough-dry, and a few pieces twisted with paste. Trim every six weeks.
Save this article
No spam. Unsubscribe anytime.
8. Shaggy Pixie With a Number-Two Nape Undercut
Oval and heart faces with medium to thick density and 1A to 2B texture suit an undercut under a shaggy pixie, with the nape clipped short so the layered top falls over a clean edge. My cut: the nape clippered dry to a number two, the crown point cut at three inches, the temple pieces left at five, and the ends razored. Style with texture spray and wax. Buzz the undercut every three weeks.
9. Face-Lengthening Shaggy Pixie Bob for Round Faces
Round faces with medium to thick density and 1B to 2B texture suit a shaggy pixie that keeps height at the crown and drops the front past the earlobe to lengthen the face. My cut: the crown point cut dry at three inches, the front angled to the jaw, the ends razored. Style by rough-drying upside down with volumizing spray, then smoothing the front down. Trim every six weeks.
10. Tapered-End Razor Cut Shaggy Pixie
Oval and square faces with medium to thick density and 1B to 2B texture suit a razor cut shaggy pixie, done entirely with a razor so every end tapers. My cut: the crown razored at three inches on damp hair, then the nape and temple pieces razored at five on dry hair. Style with sea salt spray and a rough-dry, then shake it out. Trim every six weeks.
11. Thick-Ended Shaggy Pixie Over 60
Any face shape with fine to medium density and 1A to 2A texture suits the shaggy pixie over 60, with three-inch crown layers, soft sides over the ear, and ends point cut rather than razored so they stay thick. My cut: done on dry hair with light texturizing. Style with mousse at the roots and a small round brush. Trim every six weeks; gloss every eight weeks.
12. Curl-by-Curl Curly Shaggy Pixie
Oval and heart faces with medium to thick density and 3A to 3C texture suit a curly shaggy pixie, cut dry with the crown curls shorter than the temple and nape curls. My cut: the crown at three inches of shrunken length, the nape and temple curls at five, then shaped curl by curl. Style with curl cream raked through wet hair and a low diffuse. Trim every eight weeks.
13. Front-Lit Money Piece Shaggy Pixie Bob
Fine to medium density with 1B to 2B texture suits a money piece on a shaggy pixie bob, lighting the front pieces where they fall toward the earlobe. My cut and color: the crown point cut dry at three inches, the front angled down, the ends razored, then the two front sections lightened to a level nine and toned beige. Style with texture spray and piece the front. Refresh every ten weeks.
14. Between-the-Brows Wispy Bang Shaggy Pixie
Oval and oblong faces with fine to medium density and 1A to 2A texture suit wispy bangs on a shaggy pixie, point cut thin to sit between the brows above the layered crown. My cut: the crown point cut dry at three inches, the bangs cut at the brow and point cut until they separate, the nape razored. Style the bangs down and rough-dry the rest. Trim the bangs every four weeks.
15. Bright Copper Shaggy Pixie
Warm skin tones with fine to medium density suit copper on a shaggy pixie, which reads bright on every separated layer. My cut and color: the crown point cut dry at three inches, the nape and temple pieces razored, a level seven copper at the root and a demi on the ends. Style with texture spray and a shine serum. Trim every six weeks; refresh the tone every five weeks.
16. Light-Catching Balayage Shaggy Pixie Bob
Fine to thick density with 1B to 2B texture suits balayage on a shaggy pixie bob, painted on the front pieces and crown-layer ends where the pieces separate. My cut and color: the crown point cut dry at three inches, the front angled to the earlobe, the ends razored, then hand painted to a level nine. Style by rough-drying with texture spray. Refresh every twelve weeks.
17. Corner-Softening Shaggy Pixie for Square Faces
Square faces with medium to thick density and 1B to 2B texture suit a shaggy pixie with a rounded crown and temple pieces that fall past the cheekbone to soften the corners. My cut: the crown point cut dry at three inches, the temple pieces left at five, the ends razored. Style with texture spray and a rough-dry, pushing the temple pieces forward. Trim every six weeks.
18. Blonde Shaggy Pixie With Dark Root
Fine to medium density with 1A to 2B texture suits a shadow root on a blonde shaggy pixie, holding depth at the crown while the layered ends stay bright. My cut and color: the crown point cut dry at three inches, the ends razored, a level six demi at the root, and the lengths left at level nine. Style with texture spray and piece the ends. Trim every six weeks; refresh the root every ten weeks.
19. Disconnected Shaggy Pixie Bob for Straight Hair
Oval and square faces with medium to thick density and 1A to 1C texture suit a shaggy pixie on straight hair, where every layer shows, so I point cut deep and keep the layers disconnected. My cut: the crown point cut dry at three inches, the front angled to the earlobe, an inch point cut into every end. Style flat with a paddle brush and piece the ends with wax. Trim every five weeks.
20. Sharp-Layered Dark Brunette Shaggy Pixie
Cool or neutral skin tones with fine to thick density suit dark brunette on a shaggy pixie, which makes the separated layers read as sharp lines against the skin. My cut and color: the crown point cut dry at three inches, the nape and temple pieces razored, a level four demi root to end. Style with texture spray and a little serum. Refresh the tone every eight weeks.
21. One-Sided Long Fringe Shaggy Pixie
Round and square faces with medium to thick density and 1B to 2B texture suit a long fringe on a shaggy pixie, carrying the crown layers forward to the cheekbone on one side. My cut: the crown point cut dry at three inches, the front left at five and angled to the cheekbone, the ends razored. Style by rough-drying the fringe over to one side. Trim every five weeks.
22. No-Brush Shaggy Pixie Bob That Air-Dries
Any face shape with fine to medium density and 1C to 2B texture suits a shaggy pixie bob that air-dries, every end razored so the layers fall into place without a brush. My cut: the crown point cut dry at three inches, the front angled to the earlobe, all ends razored. Style with a light cream on damp hair, scrunch, and leave it. Trim every eight weeks.
23. Evenly Textured Platinum Shaggy Pixie
Cool skin tones with fine to medium density suit platinum on a shaggy pixie, though it shows every layer, so the texture must be even. My cut and color: the crown point cut dry at three inches in even increments, the nape razored, then a lift to level ten and a violet toner. Style with a light paste and a rough-dry, plus a weekly bond builder. Retouch every four weeks.
24. Six-Inch Temple Piece Shaggy Pixie
Square and round faces with fine to thick density and 1B to 2B texture suit face framing pieces on a shaggy pixie, the longest hairs in the cut, left at the temples to fall past the cheekbone. My cut: the crown point cut dry at three inches, the temple pieces left at six and razored to a taper. Style with texture spray, pushing the pieces forward. Trim every six weeks.
25. Modern Lifted Gray Shaggy Pixie
Any face shape with fine to medium density and 1A to 2A texture suits gray on a shaggy pixie, which looks modern when the crown layers lift and the ends are pieced. My cut: the crown point cut dry at three inches, the sides left over the ear, the ends point cut. Style the crown up with a round brush, piece the ends with paste, and add a violet-toned serum. Trim every six weeks.
Read next: pixie cut with bangs and wavy pixie cut.
A shaggy pixie stays good when the layers are left a little rough, because that looseness is what gives it the worn-in look. Rough-dry and the shape shows on its own.
























