A pixie bob haircut lands between a pixie and a bob: short tapered nape, front at the earlobe, and a shape that loses its line fast, so book a trim every four to six weeks. Straight and wavy hair show the graduation clearly, and curls work when it’s cut dry. Most days, a small round brush does the styling.
1. Classic Earlobe-Length Pixie Bob

Oval and heart faces with fine to thick density and 1A to 2A texture suit the classic pixie bob, which sits between a pixie and a bob with a short tapered nape and a front at the earlobe. Working dry, I clipper-over-comb the nape, graduate it up to the occipital, and angle the front down to the earlobe. Style with a small round brush, rolling the front under. Trim every five weeks.
2. Side Swept Bang Pixie Bob With a Cheekbone Fringe
Round and square faces with fine to medium density and 1A to 2A texture suit a pixie bob haircut with side swept bangs, where the front length becomes a fringe landing at the cheekbone. Working dry, I taper the nape, graduate it to the occipital, angle the front to the earlobe, and cut the bangs from the part to the cheekbone. Blow the bangs across using a flat brush. Trim every five weeks.
3. Blunt-Front Pixie Bob for Fine Hair
Fine density in 1A to 2A texture on an oval or round face is who this is for. A pixie bob on fine hair keeps the front blunt so the ends look thick, and the nape is cut with scissors, not clippers. Working dry, I scissor cut the nape, graduate it softly, then cut the front at the earlobe with flat shears. Mousse at the damp roots and a round brush lifting the crown finish it. Trim every five weeks.
4. Stacked Pixie Bob With a Lifted Nape
Round and oval faces with fine to medium density and 1A to 2A texture suit a stacked pixie bob, which builds graduation at the back so the nape lifts and the front stays at the earlobe. Working dry, I taper the nape, stack it in half-inch increments up to the crown, and angle the front down. Lift the stack with a small round brush and roll the front under. Trim every four weeks.
5. Internally Layered Pixie Bob Haircut for Thick Hair
Thick density with 1A to 2B texture can wear this on any face shape, but a pixie bob haircut on thick hair needs internal layers or the back sticks out like a shelf. Working dry, I clipper the nape, graduate to the occipital, angle the front to the earlobe, then point cut internal layers under the weight line. Blow it flat with a paddle brush and smoothing cream. Trim every five weeks.
6. Soft-Nape Pixie Bob Over 50
Fine to medium density in 1A to 2A texture on most face shapes suits the pixie bob over 50, with a soft nape, a front at the earlobe and a side swept fringe covering the forehead. Working dry, I scissor cut the nape, graduate it softly, angle the front down, and cut the fringe to the cheekbone. Use a round brush and volumizing mousse for the blow-dry. Trim every five weeks.
7. Wavy Pixie Bob With Bent Front Pieces
Medium density with 1C to 2B texture on an oval or heart face suits a wavy pixie bob, where the front pieces bend so the shape looks softer than a straight blowout. Working dry, I taper the nape, graduate to the occipital, angle the front to the earlobe, and point cut the ends. Style with sea salt spray in damp hair, a rough-dry and paste twisted through the front pieces. Trim every six weeks.
Save this article
No spam. Unsubscribe anytime.
8. Curtain Bangs on a Pixie Bob
Round and square faces with fine to medium density and 1A to 2B texture suit curtain bangs on a pixie bob, which split at the center and fall to the cheekbone on each side. Working dry, I taper the nape, graduate to the occipital, angle the front to the earlobe, and cut the bangs from the brow to the cheekbone. Blow the bangs out using a small round brush. The bangs need a trim every five weeks.
9. Textured Pixie Bob With Deep Point Cutting
Oval and square faces with medium to thick density and 1A to 2B texture suit a textured pixie bob, which is point cut deep through the ends so the pieces come apart. Working dry, I clipper the nape, graduate to the occipital, angle the front to the earlobe, and point cut an inch into the ends. Style with a texture spray and a rough-dry, then use paste on the ends. Trim every five weeks.
10. Pixie Bob for a Round Face
Fine to thick density with 1A to 2B texture works for a pixie bob on a round face, which keeps height at the crown and drops the front to the jaw so the shape looks longer. Working dry, I taper the nape tight, graduate high, and angle the front to the jaw. Use a round brush to push the crown up, and dry the front smooth and down. Trim every five weeks.
11. Sleek Pixie Bob With a Smooth Curve
Oval and square faces with fine to thick density and 1A to 1C texture suit a sleek pixie bob, which shows the graduation as one smooth curve from the nape to the front. Working dry, I clipper the nape, graduate to the occipital, and angle the front to the earlobe with flat shears. Blow it flat using a paddle brush, smooth with a flat iron, and finish with a serum. Trim every five weeks.
12. Soft-Graduated Pixie Bob Over 60
Any face shape with fine to medium density and 1A to 2A texture suits the pixie bob over 60, where I keep the graduation soft, the front at the earlobe and the ends point cut so they stay thick. The nape is scissor cut dry and graduated in wide increments, then the front is angled down. Use mousse at the roots with a small round brush. A trim every five weeks and a gloss every eight keep it fresh.
13. Curly Pixie Bob Cut Dry
Oval and heart faces with medium to thick density and 3A to 3C texture suit a curly pixie bob, cut dry, curl by curl, so the graduation still shows when the curl springs. Working curl by curl on dry hair, I cut the nape, graduate to the occipital, and leave the front at the earlobe. Use a curl cream raked through wet hair, then diffuse on low. Trim every eight weeks.
14. Money Piece Pixie Bob Haircut
Fine to medium density with 1A to 2B texture suits a money piece on a pixie bob haircut, which lights up the front pieces where they frame the face. Working dry, I taper the nape, graduate to the occipital, and angle the front to the earlobe, then lift the two front sections to a level nine with a beige toner. Blow the front forward using a round brush. Refresh every ten weeks.
15. Blunt Fringe Pixie Bob at the Brow
Oval and oblong faces with fine to medium density and 1A to 1C texture suit a blunt fringe on a pixie bob, which sets a straight line at the brow against the graduated back. On dry hair the nape is clippered and graduated to the occipital, the front is angled to the earlobe, and the fringe is cut at the brow with the shears flat. Blow the fringe down using a flat brush. Trim the fringe every four weeks.
16. Copper Pixie Bob With a Bright Curve
Warm skin tones with fine to medium density suit copper on a pixie bob, which looks bright along the curve of the graduation. Working dry, I taper the nape, graduate to the occipital, and angle the front to the earlobe, then use a level seven copper at the root and a demi through the ends. Style with a round brush and a serum. A trim every five weeks and a tone refresh every five keep it bright.
17. Front-Painted Balayage Pixie Bob
Fine to thick density with 1A to 2B texture suits balayage on a pixie bob, painted on the front pieces so the short back stays dark. Working dry, I taper the nape, graduate to the occipital, angle the front to the earlobe, and hand paint the front up to a level nine. Blow the front forward using a round brush and finish with a serum. Refresh every twelve weeks.
18. Pixie Bob Haircut for a Square Face
Fine to thick density with 1A to 2B texture suits a pixie bob haircut on a square face, which drops the front below the jaw and softens the corners with point cut face framing. Working dry, I taper the nape, graduate to the occipital, angle the front an inch below the jaw, and point cut the face frame. Use a round brush and roll the front under. Trim every five weeks.
19. Shadow Root Blonde Pixie Bob
Fine to medium density with 1A to 2B texture suits a shadow root on a blonde pixie bob, which keeps depth at the crown while the front stays bright. Working dry, I taper the nape, graduate to the occipital, and angle the front to the earlobe, then use a level six demi on the root while the lengths stay level nine. Style with a round brush. It needs a trim every five weeks and a root refresh every ten.
20. Straight Hair Pixie Bob With Clean Graduation
Oval and square faces with fine to medium density and 1A to 1C texture suit a pixie bob on straight hair, which shows every line of the graduation, so the cut must be clean. Working dry, I clipper the nape, graduate it in quarter-inch increments, and angle the front to the earlobe with flat shears. Blow it flat with a paddle brush and use a flat iron to turn the front under. Trim every five weeks.
21. Dark Brunette Pixie Bob With a Sharp Curve
Cool or neutral skin tones with fine to thick density suit dark brunette on a pixie bob, which makes the curve of the graduation look sharp against the skin. Working dry, I taper the nape, graduate to the occipital, angle the front to the earlobe, and apply a level four demi from roots to ends. Blow it flat using a paddle brush and finish with a serum. Refresh the tone every eight weeks.
22. Layered Pixie Bob With a Moving Front
Most face shapes with medium to thick density and 1A to 2B texture suit layers through a pixie bob, which add movement to the front without touching the graduated back. Working dry, I taper the nape, graduate to the occipital, angle the front to the earlobe, then point cut layers from the cheekbone through the front. Rough-dry using a volumizing spray and paste to piece it. Trim every five weeks.
23. Air-Dry Pixie Bob With Point Cut Ends
Any face shape with fine to medium density and 1C to 2B texture suits a pixie bob that air-dries, with ends point cut so the shape falls without a brush. Working dry, I taper the nape, graduate softly, angle the front to the earlobe, and point cut deep into the ends. Smooth a light cream through damp hair, finger-push the front forward, and leave it. Trim every six weeks.
24. Platinum Pixie Bob With Even Graduation
Cool skin tones with fine to medium density suit platinum on a pixie bob, which shows the graduation clearly, so the cut must be even. Working dry, I clipper the nape, graduate to the occipital, angle the front to the earlobe, then lift to a level ten and use a violet toner. Blow it flat using a paddle brush, and apply a bond builder weekly. Retouch every four weeks.
25. Pixie Bob With Temple Face Framing Pieces
Square and round faces with fine to thick density and 1A to 2B texture suit face framing pieces on a pixie bob, the longest hairs in the cut, left at the temples to fall past the cheekbone. Working dry, I taper the nape, graduate to the occipital, angle the front to the earlobe, and keep the temple pieces an inch longer before point cutting them. Blow the pieces forward. Trim every five weeks.
If this fits, also read curly pixie cuts and pixie cut shaved sides.
A pixie bob lands well when the back is clipped close and the front grazes the ear, because that short-to-long shift is the whole shape. A flat brush through the front finishes it.
























