An angled bob lives or dies on about an inch: the nape sits shorter, the front drops to the jaw or collarbone, and a round brush turning the ends under keeps that line showing by afternoon. I cut most angled bob haircuts dry with the shears flat so the diagonal stays clean between trims every six to eight weeks.
1. Classic Angled Bob Cut to the Jaw

Round and square faces with fine to thick density and 1A to 2A texture get the most from the classic angled bob, which opens my list of angled bob haircuts. The front lands at the jaw and the nape sits an inch shorter. I cut the nape dry first, then angle the line forward to the jaw holding the shears flat. A round brush rolling the front under handles the blow-dry. Trim every six weeks.
2. Long Angled Bob Haircuts Falling to the Collarbone
If your face is round, square, or oval, long angled bob haircuts work in fine to thick density and 1A to 2A texture. Here the back sits at the shoulder and the front drops to the collarbone, an angle of over two inches. Working dry, I cut the back first, angle the front down, and point cut the ends. Style with a smooth round-brush blow-dry and a little serum. Trim every eight weeks.
3. Curtain Bangs Angled Bob
Best on round or square faces with fine to medium density and 1B to 2B texture, curtain bangs give an angled bob a softer diagonal by adding a second line from brow to cheekbone. On dry hair I take the nape an inch shorter than the front and angle to the jaw. Then I section a triangle and cut the bangs from the brow to the cheekbone. A small round brush blows them out. Trim the bangs every five weeks.
4. Angled Bob Designed for Fine Hair
Fine density with 1A to 2A texture on oval and round faces needs the angle kept blunt so the line of an angled bob reads thick. With the shears flat on dry hair, I cut the nape an inch shorter than the front and angle to the jaw. Two short crown layers, point cut, add lift. Mousse goes on damp roots before a round-brush blow-dry. Trim every six weeks.
5. Graduated Stacked Angled Bob
Styled with a round brush that turns the front under and lifts the stack, a stacked angled bob shows off its nape graduation, which lifts the back as the front drops to the jaw. It suits round and square faces with fine to thick density and 1A to 2A texture. I cut the nape short with graduation on dry hair, set the weight line at the occipital, and angle the front down. Trim every five weeks.
6. Long Angled Bob Haircuts With Chin Layers
Most face shapes can wear long angled bob haircuts with layers in fine to medium density and 1A to 2B texture. The collarbone angle stays, and layers starting at the chin make the front move. On dry hair I cut the back at the shoulder, angle the front to the collarbone, and point cut the layers from the chin. Turn the ends under with a round brush, then add a light cream. Trim every eight weeks.
7. Angled Bob Built for Thick Hair
Thick density with 1A to 2B texture on any face shape needs internal layers so an angled bob lies flat instead of flaring. I cut the nape an inch shorter than the front on dry hair and angle to the jaw. Then I point cut internal layers through the sides and back, never touching the outline. A smoothing cream and paddle brush give a flat blow-dry. Trim every six weeks.
Save this article
No spam. Unsubscribe anytime.
8. Over-50 Angled Bob With Side Fringe
Women with fine to medium density and 1A to 2A texture wear this angled bob over 50 well: front at the chin, back at the nape, and a side swept fringe to the cheekbone. Cutting dry, I take the nape first, angle the front to the chin with point cut ends, and cut the fringe from the part to the cheekbone. Smoothing cream and a round brush handle the blow-dry. Trim every six weeks.
9. Soft Wavy Angled Bob
Waved at the front with a one-inch iron, ends left straight and broken up with texture spray, a wavy angled bob looks softer than a straight blowout. It suits round and square faces with fine to medium density and 1B to 2B texture. On dry hair I cut the nape an inch shorter than the front, angle to the jaw, and point cut the ends. Trim every six weeks.
10. Side-Parted Long Angled Bob Haircuts
Round and square faces with fine to thick density and 1A to 2B texture suit long angled bob haircuts with a side part, which swings the longer front piece to one side so the angle shows from the front. On dry hair I cut the back at the shoulder and angle the front to the collarbone. The part goes two inches off center. Blow-dry smooth with a round brush and tuck the short side. Trim every eight weeks.
11. Blunt Fringe Angled Bob Cut
For oval and oblong faces with fine to medium density and 1A to 1C texture, a blunt fringe on an angled bob sets a horizontal line against the diagonal. Cutting dry, I take the nape an inch shorter than the front and angle to the jaw. The fringe is cut at the brow with the shears flat. Use a flat brush to dry the fringe down and a round brush to turn the bob under. Trim the fringe every four weeks.
12. Sleek Angled Bob Blown Flat
A flat paddle-brush blow-dry, a flat iron over heat protectant, and serum are how a sleek angled bob is styled, since the diagonal sits against a flat surface and every piece must lie down. Round and square faces with fine to thick density and 1A to 1C texture wear it well. I cut dry with the shears flat, nape an inch shorter than the front, then angle to the jaw. Trim every six weeks.
13. Over-60 Soft Angled Bob
Fine to medium density with 1A to 2A texture works for this angled bob over 60. The front sits at the chin, the nape stays soft instead of stacked, and point cut ends keep their thickness. I cut dry, angle the line to the chin, and texturize lightly. Mousse at the roots and a round brush handle styling. Trim every six weeks and gloss every eight.
14. Curly Angled Bob for 3A to 3C Curls
Oval and heart faces with medium to thick density and 3A to 3C texture suit a curly angled bob. I cut it dry, curl by curl, so the angle still shows when the curl springs. The nape lands an inch shorter than the front, and the front angles to the jaw. Rake curl cream through wet hair and diffuse on low. Trim every eight weeks.
15. Round-Face Long Angled Bob Haircuts
With fine to thick density and 1A to 2B texture on a round face, angled bob haircuts work best with the front dropped past the chin, so the diagonal draws the eye down. Cutting dry, I set the back at the shoulder, angle the front to the collarbone, and point cut one layer below the chin. Blow-dry smooth with a round brush, lifting the crown. Trim every eight weeks.
16. Money Piece Angled Bob Color
Blown out at the front with a round brush, a money piece on an angled bob lights the longer front pieces where the angle is longest. It suits fine to medium density with 1A to 2B texture. I cut dry, nape an inch shorter than the front, and angle to the jaw. The two front sections are lightened to a level nine and toned beige. Refresh every ten weeks.
17. Point-Cut Textured Angled Bob
Oval and square faces with medium to thick density and 1B to 2B texture suit a textured angled bob, with deep point cutting through the ends to soften the diagonal. I cut the nape an inch shorter than the front on dry hair and angle to the jaw. Then I point cut an inch into the ends. Rough-dry with texture spray and bend the ends using a flat iron. Trim every six weeks.
18. Side Swept Bangs on an Angled Bob
Dried across with a flat brush, side swept bangs on an angled bob run the same way as the diagonal, from part to cheekbone. They suit round and square faces with fine to medium density and 1A to 2B texture. Cutting dry, I take the nape an inch shorter than the front and angle to the jaw. The bangs go from the part down to the cheekbone. Trim the bangs every five weeks.
19. Bright Copper Angled Bob
Warm skin tones with fine to medium density suit copper on an angled bob, which reads bright along the diagonal. I cut the nape an inch shorter than the front on dry hair and angle to the jaw. Color is a level seven copper at the root and a demi through the ends. Style with a round brush and serum. Trim every six weeks and refresh the tone every five.
20. Long Angled Bob Haircuts With Front Balayage
Fine to thick density and 1A to 2B texture suit balayage on long angled bob haircuts, painted brightest at the front where the angle is longest. I cut the back at the shoulder on dry hair and angle the front to the collarbone. The front pieces and ends are hand painted to a level nine. Use a round brush and serum to finish. Refresh every twelve weeks.
21. Square-Face Angled Bob
On a square face with fine to thick density and 1A to 2B texture, angled bob haircuts need the front dropped below the jaw so the diagonal passes the corners. Cutting dry, I take the nape an inch shorter than the front, angle the front to an inch below the jaw, and point cut the ends. Round-brush it, turning the front under. Trim every six weeks.
22. Blonde Angled Bob With Shadow Root
Fine to medium density and 1A to 2B texture suit a shadow root on a blonde angled bob, keeping depth at the part and light along the angle. I cut the nape an inch shorter than the front on dry hair and angle to the jaw. A level six demi goes on the root, and the lengths stay level nine. Style with a round brush. Trim every six weeks and refresh the root every ten.
23. Angled Bob on Straight Hair
Blown flat with a paddle brush and bent under at the front with a flat iron, an angled bob on straight hair holds the diagonal without product, so the cut must be clean. It suits round and square faces with fine to medium density and 1A to 1C texture. Cutting dry with the shears flat, I take the nape an inch shorter than the front and angle to the jaw. Trim every six weeks.
24. Deep Dark Brunette Angled Bob
Cool or neutral skin tones with fine to thick density suit dark brunette on an angled bob, which makes the diagonal look sharp against the skin. I cut dry with the shears flat, nape an inch shorter than the front, and angle to the jaw. A level four demi goes on from root to end. Paddle-brush it flat and add serum. Refresh the tone every eight weeks.
25. Long Angled Bob Haircuts for Air Drying
Any face shape with fine to medium density and 1C to 2B texture can wear angled bob haircuts that air-dry, built on one layer below the chin and a side part so the angle falls without a brush. On dry hair I cut the back at the shoulder, angle the front to the collarbone, and point cut that one layer. Rake a light cream through damp hair, side part it, and leave it. Trim every eight weeks.
Another angle: pixie haircut for round faces and short hair for oval face shape.
Angled bob haircuts turn on about an inch: the nape shorter, the front to the jaw, and a round brush turning the ends under is what keeps the line. A trim every six weeks holds the angle.
























