A long pixie haircut keeps about four to five inches on top while the nape and sides taper short, so you get enough length to tuck behind the ear or sweep into a fringe. Styling is mostly a blow-dryer and a dab of paste or mousse, with a trim every five weeks to hold the shape.
1. Classic Tuck-Behind-the-Ear Long Pixie Haircut

Oval and heart faces with fine to thick density and 1A to 2B texture wear the classic long pixie haircut well. The top stays long enough to tuck behind the ear while the sides and nape taper short. On dry hair I clipper-over-comb the nape and sides, point cut the top to four inches, and blend at the parietal ridge. Style the top forward with a blow-dryer and a light paste. Trim every five weeks.
2. Side Swept Bang Long Pixie Cut
Round and square faces with fine to medium density and 1A to 2A texture suit a long pixie cut with side swept bangs, where the top length runs into a fringe reaching the cheekbone. On dry hair I taper the nape and sides, cut the top at five inches, then point cut the fringe from the part to the cheekbone. Dry the fringe across with a flat brush and finish with a light spray. Trim every five weeks.
3. Blunt-Top Long Pixie for Fine Hair
Fine density in 1A to 2A texture on an oval or round face is who this is for. A long pixie on fine hair keeps the ends of the top blunt so it looks thick, and the sides are cut with scissors rather than clippers. Working dry, I take the sides short with shears, then cut the top at four inches with flat shears. Mousse at the damp roots and a blow-dry up and over finish it. Trim every five weeks.
4. Undercut Long Pixie With a Long Top
Oval and heart faces with medium to thick density and 1A to 2B texture suit an undercut under a long pixie, which clips the nape and one side short so the long top falls over it. On dry hair the nape and left side go to a number two, then the top is cut at five inches with point cut ends. Blow the top over the undercut and use wax to piece it. Buzz the undercut every three weeks.
5. Debulked Long Pixie Cut for Thick Hair
Thick density with 1A to 2B texture can wear this on any face shape, but a long pixie cut on thick hair needs the interior thinned or the top stands up like a wedge. After clippering the dry nape and sides and cutting the top at four inches, I point cut internal layers under the top to remove bulk. Blow-dry the top flat using smoothing cream and a paddle brush. Trim every five weeks.
6. Soft-Sided Long Pixie Over 50
Fine to medium density in 1A to 2A texture on most face shapes suits the long pixie over 50, with soft sides over the ear, a four-inch top and a side swept fringe. On dry hair I scissor cut the sides and nape, then cut the top and fringe and point cut the ends. Use volumizing mousse and a small round brush to blow-dry the top. Trim every five weeks.
7. Wavy Long Pixie With Tapered Sides
Medium density with 1C to 2B texture on an oval or heart face suits a wavy long pixie, which keeps the top long enough to bend and tapers the sides so the waves sit up top. On dry hair I clipper the sides and nape, take the top to five inches, and point cut the ends. Style with sea salt spray scrunched into damp hair, a rough-dry and some paste twisted through a few pieces. Trim every six weeks.
Save this article
No spam. Unsubscribe anytime.
8. Curtain Bangs on a Long Pixie Haircut
Round and square faces with fine to medium density and 1A to 2B texture suit a long pixie haircut with curtain bangs, where the top splits at the center to frame both sides of the face. On dry hair I taper the sides and nape, cut the top at five inches, then take the front to the cheekbone on both sides with point cut ends. Blow the front outward using a small round brush. Trim every five weeks.
9. Textured Long Pixie With Point Cut Ends
Oval and square faces with medium to thick density and 1A to 2B texture suit a textured long pixie, point cut deep through the top so the pieces come apart. On dry hair I clipper the nape and sides, cut the top at four inches, then point cut an inch into the ends. Style with a texture spray and a rough-dry, then piece the top using paste. Trim every five weeks.
10. Long Pixie for a Round Face
Fine to thick density in 1A to 2B texture works for a long pixie on a round face, which keeps crown height and a fringe that angles past the cheekbone to lengthen the face. On dry hair I taper the sides tight, cut the top at five inches, then angle the fringe below the cheekbone. Blow the crown up with a round brush, and the fringe down and across. Trim every five weeks.
11. Sleek Flat-Lying Long Pixie
Oval and square faces with fine to thick density and 1A to 1C texture suit a sleek long pixie, which lies flat to the head with the top combed forward or to one side. Working dry, I clipper the nape and sides, then cut the four-inch top with the shears flat. Blow the top flat with a paddle brush, then smooth it with a flat iron and a light serum. Trim every five weeks.
12. Soft-Sided Long Pixie Over 60
Any face shape with fine to medium density and 1A to 2A texture suits the long pixie over 60, where I keep the sides soft, the top at four inches and the ends point cut so they stay thick. The nape and sides are scissor cut dry, then I cut the top and texturize it lightly. Use mousse at the roots and a small round brush for the blow-dry. A trim every five weeks and a gloss every eight keep it fresh.
13. Curly Long Pixie Cut Curl by Curl
Oval and heart faces with medium to thick density and 3A to 3C texture suit a curly long pixie, which is cut dry, curl by curl, with shorter sides so the curls sit on top. I work the sides and nape one curl at a time on dry hair, leave the top at five inches, and shape it curl by curl. Use a curl cream raked through wet hair, then diffuse on low. Trim every eight weeks.
14. Money Piece Long Pixie Cut
Fine to medium density with 1A to 2B texture suits a money piece on a long pixie cut, which lights up the front of the top where it sweeps forward. On dry hair I taper the sides and nape and cut the top at five inches, then lighten the front section to a level nine with a beige toner. Blow-dry the top forward, then use a light paste on the front. Refresh every ten weeks.
15. Blunt Fringe Long Pixie at the Brow
Oval and oblong faces with fine to medium density and 1A to 1C texture suit a blunt fringe on a long pixie, which draws a straight line at the brow against the tapered sides. On dry hair I clipper the sides and nape, cut the top at four inches, then cut the fringe at the brow holding the shears flat. Use a flat brush to dry the fringe down and blow the top forward. Trim the fringe every four weeks.
16. Copper Long Pixie With Short Sides
Warm skin tones with fine to medium density suit copper on a long pixie, which looks bright against the short sides. On dry hair I clipper the nape and sides and cut the top at four inches, then use a level seven copper at the root and a demi through the ends. Blow-dry the top forward and finish it with shine serum. A trim every five weeks and a tone refresh every five keep the color bright.
17. Balayage-Painted Long Pixie Haircut
Fine to thick density in 1A to 2B texture suits balayage on a long pixie haircut, painted on the top only so the short sides stay dark and the length looks lighter. On dry hair I taper the sides and nape, cut the top at five inches, then hand paint the top to a level nine. Blow the top forward and use paste to piece it. Refresh every twelve weeks.
18. Long Pixie Haircut for a Square Face
Fine to thick density in 1A to 2B texture suits a long pixie haircut on a square face, softening the corners with a fringe past the cheekbone and sides left a bit longer over the ear. Working dry, I take the sides in with scissors, leave the top at five inches, and angle the fringe to fall below the cheekbone. Blow the fringe across and the top up. Trim every five weeks.
19. Shadow Root Blonde Long Pixie
Fine to medium density with 1A to 2B texture suits a shadow root on a blonde long pixie, which keeps depth at the crown and leaves the top bright. On dry hair I taper the sides and nape and cut the top at five inches, then use a level six demi on the root while the lengths stay level nine. Blow the top forward and piece it out. It needs a trim every five weeks and a root refresh every ten.
20. Straight Hair Long Pixie With a Clean Taper
Oval and square faces with fine to medium density and 1A to 1C texture suit a long pixie on straight hair, which shows every line, so the taper and top must be clean. Working dry, I clipper the nape and sides and cut the four-inch top with flat shears. Blow the top flat with a paddle brush, then use a flat iron to bend the front. Trim every five weeks.
21. Dark Brunette Long Pixie With a Sharp Taper
Cool or neutral skin tones with fine to thick density suit dark brunette on a long pixie, which makes the taper look sharp against the skin. On dry hair I clipper the nape and sides, cut the top at four inches, and apply a level four demi from roots to ends. Blow the top flat with a paddle brush and finish with a serum. Refresh the tone every eight weeks.
22. Layered Long Pixie Haircut
Most face shapes with medium to thick density and 1A to 2B texture suit layers through a long pixie haircut, running from crown to front so the top moves rather than sitting as one piece. On dry hair I taper the sides and nape, cut the top at five inches, then point cut layers forward from the crown. Rough-dry using a volumizing spray and paste to piece it. Trim every five weeks.
23. Air-Dry Long Pixie With Point Cut Ends
Any face shape with fine to medium density and 1C to 2B texture suits a long pixie that air-dries, with the top point cut so it falls in pieces without a brush. Working dry, I clipper the nape and sides, leave four inches on top, and point cut deep into those ends. Smooth a light cream through damp hair, finger-push the top forward, and leave it. Trim every six weeks.
24. Platinum Long Pixie With an Even Cut
Cool skin tones with fine to medium density suit platinum on a long pixie, which shows the taper and top clearly, so the cut must be even. On dry hair I clipper the nape and sides, cut the top at four inches, then lift to a level ten and use a violet toner. Blow the top forward, piece it with light paste, and apply a bond builder weekly. Retouch every four weeks.
25. Long Pixie With Temple Face Framing Pieces
Square and round faces with fine to thick density and 1A to 2B texture suit face framing pieces on a long pixie, which are the longest hairs in the cut, left at the temples to fall past the cheekbone. On dry hair I taper the nape and back, cut the top at five inches, then leave the temple pieces at six and point cut them. Blow the pieces forward and the top up. Trim every five weeks.
See also pixie bob and curly pixie cuts.
A long pixie haircut works because the top is left long enough to sweep across the forehead, so it reads styled rather than shorn. A small amount of paste directs the piece.
























